Advertisement
TROUBLE SHOOTING TABLE
Unit does not turn on - LCD does not illuminate or L CD contrast has decreased:
• Depress fire button (top right hand side of unit).
• Check and if necessary, replace battery.
There is no reset button to clear last range reading before ranging another target:
• The last range reading does not need to be cleared before ranging another target. Simply aim at the new target using the
LCD's reticle, depress the fire button and hold until new range reading is displayed.
There are black spots in the optical system:
• These are a natural characteristic of the LCD and can not be fully eliminated in the manufacturing process.
Target range cannot be obtained:
• Make sure LCD is illuminated.
• Make sure that the fire button is being depressed (as opposed to mode button).
• Make sure that nothing, such as your hand or finger, is blocking the objective lenses (lenses closest to the target) that
emit and receive the laser pulses.
• Make sure unit is held steady while depressing fire button.
• A less reflective target will require you to scan its surface to find the most reflective point in order to obtain a distance. To
do this, hold the fire button and scan LCD reticle across the target's surface to try and register a "hit" on the target quality
meter. When the target quality gauge registers a hit (indicated when the first square illuminates), stabilize the unit in place
and hold the fire button until a range reading is displayed.
For further assistance, please contact a customer service representative at 800-423-3537.
W A R RA N TY / R E P A I R
One-Year LIMITED WARRANTY
Your Bushnell
Laser Rangefinder is warranted to be free of defects in
®
materials and workmanship for one year after the date of purchase. In the
event of a defect under this warranty, we will, at our option, repair or replace
the product, provided that you return the product postage prepaid. This
warranty does not cover damages caused by misuse or improper handling,
installation or maintenance of the product.
Any return made under this warranty
must be accompanied by the items listed below:
1) A check in the amount of $15.00 to cover the cost of handling
2) Name and address for product return
3) An explanation of the defect
4) Product should be well packed in a sturdy outside shipping
carton to prevent damage in transit and return postage prepaid
to the address listed below:
IN U.S.A. Send To:
Bushnell Performance Optics
8500 Marshall Drive
Lenexa, Kansas 66214
For products purchased outside the United States and Canada please contact
your local dealer for applicable warranty information. This warranty gives you
specific legal rights. You may have other rights which vary from country
to country.
©2001 Bushnell Performance Optics
IN CANADA Send To:
Bushnell Performance Optics
25A East Pearce Street, Unit 1
Richmond Hill, Ontario L4B 2M9
2
Advertisement
