Amx Duet Module Interface Specifications; Port Mapping; Channels - AMX DAS-M-0404 Operation/Reference Manual

AMX Duet Module Interface Specifications

Port Mapping

This module uses multiple virtual devices in order distinguish events for one zone from another or to
distinguish one input source from another.
Mi Series - Port Mapping
Virtual Device
41001:1:0
41001:2:0 - 41001:8:0 (inputs)
41001:2:0 - 41001:64:0 (rooms)

Channels

The UI module controls the Mi Series via channel events (NetLinx commands pulse, on, and off) sent to
the COMM module. The channels supported by the COMM module are listed below. These channels are
associated with the virtual device(s) and are independent of the channels associated with the touch panel
device. Depending on how the device is programmed each source has it's own set of applicable
commands/channels (see the Input Source Types section on page 88).
An asterisk ( * ) indicates an extension to the standard API.
Mi Series - Channels
Channel Description
1
3
9
21
22
23
24
25
26
27
28
40
44
45
Mi Series Audio Controllers
Input Sources use ports 1 - 8.
Rooms/Zones use ports 1 - 64.
Channels
All
1,3,9,21,22,23,27,28,
40,44,45,46,47,48,49,
81,82,225,226,255,301,
303
24,25,26,164,
165,166,167,
168,169,196,
199,302,304, 305,306
PULSE: Play
PULSE: Pause
PULSE: Cycle Source Power
PULSE: Enter Button
PULSE: Next Station Preset
PULSE: Previous Station Preset
ON: Ramp Volume Up – used for feedback also
OFF: Stop Ramping
ON: Ramp Volume Down – use for feedback also
OFF: Stop Ramping
PULSE: Cycle Volume Mute
PULSE: Set Source Power On
PULSE: Set Source Power Off
PULSE: Cycle Tuner Band
PULSE: Menu Button
PULSE: Move Menu Cursor Up
AMX Duet Module Interface Specifications
Levels Control Feedback
All All All
none ?BAND BAND-
?XCH XCH-
XCH- TUNE_MODE-
TUNERPRESETSAVE
1, 2,3,4,8 ?INPUT INPUT-
INPUT-
81