To Review The Caller Id History; Make A Call Log Entry Ready To Dial - AT&T EL52209 User Manual

Caller ID
Caller ID history

To review the caller ID history

1. When a handset is in idle mode, press
the caller ID history in reverse chronological order
starting with the most recent call.
-OR-
You can also review the caller ID history by pressing
/SELECT, then press
MENU
>CALL LOG, then press
2. Press CID or DIR
on the right.
3. Press OFF/
A double beep sounds when the list reaches the beginning
or end of the call log.

Make a call log entry ready to dial

Although the call log entries received typically have
10 digits (the area code plus the seven-digit number),
in some areas, you might need to dial only the seven
digits, or 1 plus the seven digits, or 1 plus the area
code plus the seven digits. You can change the
number of digits that you dial from and store in the
call log.
While reviewing the call log, press # repeatedly to
show different dialing options for local and long
distance numbers before dialing or saving the
telephone number in the directory.
Press 1 repeatedly if you need to add or remove 1 in front of the telephone
number before dialing or saving it in the directory.
When the number is shown in the correct format for dialing, press
PHONE/
FLASH
NOTE: If you do not need to dial the area code for local calls, make sure to
program your home area code, see page 13 for details
CID or DIR
/SELECT twice to REVIEW.
MENU
to scroll through the list as shown
to exit the caller ID history.
CLEAR
or SPEAKER to call the number.
CID to review
to scroll to
34
IBOETFU!2
7!NJTTFE!DBMMT!
6;48
QN
CID
Spcfsu!Cspxo
999.994.3556
4;51
QN
Dibsmjf!Kpiotpo
911.333.4222
3;61
QN
994.3556
2.994.3556
Press #
999.994.3556
2.999.994.3556
994.3556
2.994.3556
999.994.3556
2.999.994.3556
9017
9017
9017
Press
1