Handset Operation; Speakerphone Information; Last Number Redial - AT&T EL52209 User Manual

Telephone operation

Handset operation

Speakerphone information

During a call, press
and normal handset use. Press
NOTES:
1. If you use the speakerphone during LOW BATTERY
mode, the handset is not lit except for the
button.
2. The speakerphone uses more power than the normal
handset. If the handset battery becomes very low while
you are using the speakerphone, the call remains in
speakerphone mode until you hang up or the battery
becomes depleted. When the battery is very low, you
cannot switch a call from normal handset use to
speakerphone mode.
3. After installing the battery into the handset, the screen
may show LOW BATTERY. If you use speakerphone at
this time, the battery may become depleted. Follow the
instructions in the Battery installation & charging
section on pages 5-6.

Last number redial

To view the recently dialed numbers:
• To display the most recently called number (up to 30
digits), press REDIAL/
• To view up to five recently called numbers, press
REDIAL/
PAUSE
REDIAL/
PAUSE
The handset beeps twice at the beginning and at the end of the list.
Press OFF/
CLEAR
To redial a number:
• To dial the displayed number, press
-OR-
• You can call the most recently called number by pressing
PHONE/FLASH or
While reviewing the redial memory, press
number.
SPEAKER to switch between hands-free speakerphone
OFF/
.
PAUSE
then press CID or DIR , or press
repeatedly.
to exit.
SPEAKER. Then pressing REDIAL/
to hang up.
CLEAR
SPEAKER
PHONE/FLASH or
/DELETE to delete the displayed
MUTE
20
Elapsed time
TQFBLFS!1;11;41
SFEJBM
999.994.3556
SPEAKER.
.
PAUSE