Powering Off The Projector; Warning Indicator - Optoma TW775 User Manual

Powering Off the Projector

1. Press POWER to turn off the projector lamp, a message displays on the
projector's screen.
2. Press POWER again to confirm, otherwise the message disappears
after 15 seconds.
3. The cooling fans continue to operate for about 10 seconds for cooling
cycle and the Power Led will turn blue. When the light is solid
amber, the projector has entered standby mode.
(If you wish to turn the projector back on, you must wait until the
projector has completed the cooling cycle and has entered standby
mode. Once in standby mode, simply press POWER to restart the
projector.)
4. Turn off the main power switch. Disconnect the power cord from
the electrical outlet and the projector.
5. Do not turn on the projector immediately following a power off
procedure.

Warning Indicator

When the LAMP LED indicator lights red, the projector will
v
automatically shut itself down. Please contact your local reseller
or service center. See pages 65-67.
When the TEMP LED is on a steady (not flashing) red, the
v
projector will automatically shut itself down. Under normal
conditions, the projector can be switched on again after it has
cooled down. If the problem persists, you should contact your
local dealer or our service center. See pages 65-67.
When the TEMP LED flashes red, it indicates the fan has failed.
v
Please contact your local dealer or our service center. See pages
65-67.
Installation
English
1