Powering On/Off The Projector; Powering On The Projector - Optoma TW775 User Manual

Powering On/Off the Projector

1. Remove the lens cover.
2. Connect the power cord to the projector.
3. Turn On the connected devices.
4. Ensure the Power LED turns amber and then press the power
Turn on the
v
projector first
and then
select the
signal sources.
First time to
turn on the
projector:
Remember to
select the type
of lens you
have installed.
Detail see page
51.
If the connected device is a PC, press the appropriate keys on the
computer keyboard to switch the display output to the projector.
(Check the user manual of the PC to determine the appropriate Fn
key combination to change display output.)

Powering On the Projector

button to turn On the projector.
The Power LED will now flash blue.
The startup screen will display in approximately 30 seconds. The
first time you use the projector, you can select your preferred lan-
guage and Power Mode setup after the startup screen display.
Installation
English
1