resetConnUnitPortCounters(8)
}
Access
Read-write
Status
Mandatory
Return value
See
Table 24
connUnitPortControl write command values.
Table 24
connUnitPortControl read return values
Port value
Online
Offline
Diagnostics
Other
Table 25
connUnitPortControl write command values
Control value
Online(7)
Offline(6)
ResetCounters(8)
Other
connUnitPortName (1.3.6.1.3.94.1.10.1.17)
A user-defined name for this port. This means that up to DisplayString characters may be supported. If
less than that number of characters, then the name is truncated in the connUnit.
Syntax
INTEGER
Access
Read-write
Status
Mandatory
Return value
The symbolic port name. All ports return port followed by the port number. For example, port#2
would return Port2 by default.
connUnitPortPhysicalNumber (1.3.6.1.3.94.1.10.1.18)
The internal port number this port is known by. In many implementations, this should be the same as
connUnitPortIndex. Some implementations may have an internal port representation that is not
compatible with the rules for table indexes. In that case, provide the internal representation of this port in
this object. This value may also be used in the connUnitLinkPortNumberX or
connUnitLinkPortNumberY objects of the connUnitLinkTable.
HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide
for connUnitPortControl read return values. See
Return value
online(7)
offline(6)
offline 6)
unknown(1)
Command sent
online
offline
clear counters
error returned
Table 25
for
95