Removing The Cable-Management Arm - Dell PowerEdge 4600 Manual

Removing the Cable-Management Arm

Shut down and turn off the system you are converting as well as all peripherals
1
attached to this system.
At the back of the rack cabinet, disconnect and remove the AC power cable and all
2
other cables connected to the back of the system and secured to the cable-
management arm with Velcro straps.
Squeeze the release tab that secures the front of the cable-management arm to the
3
back of the system (see Figure 1-2).
F i g u r e 1 - 2 . R e m o v i n g t h e C a b l e - M a n a g e m e n t A r m
back of system
captive thumbscrew
cable-management arm
Velcro strap
cable tray
screws (5)
Rac k - t o -To w e r C o n v e r s io n G u i d e
1-5