Removing The Slide Assemblies - Dell PowerEdge 4600 Manual

F i g u r e 1 - 9 .

Removing the Slide Assemblies

This procedure includes information on removing RapidRails™ and VersaRails™ slide
assemblies.
NOTE: If screws are not used to secure the slide assemblies in the rack, continue with
step 1. If screws are used to secure the slide assemblies to the front and back vertical
rails, go to step 4.
At the front of the rack cabinet, locate the blue release push button on one of the slide
1
assembly's mounting-bracket flanges (see Figure 1-10).
From the front of the rack cabinet, press in on the blue release push button, lift up,
2
and push the slide assembly approximately 2.54 cm (1 inch) back from the front
vertical rail until the mounting-bracket flange and its mounting hooks disengage from
the square holes in the front vertical rail (see Figure 1-10).
1-14 Rac k - t o-To we r Co n v ers io n G ui d e
I n s t a l l i n g t h e To w e r F r o n t B e z e l