Table 15 lists the rack types supported on the R220.
Rail
Product
identifier
A4
R220
A6
For detailed information about static rails, see the Rack rail specifications section in Appendix A. For
more information on installing the R220 in a rack, see the
Dell.com/Support/Manuals.
Cable management arm
The static rails for the R220 support a wide variety of racks and mounting configurations but do not
support the ability to extend the system out of the rack for service and do not provide support for a
cable management arm (CMA).
Dell PowerEdge R220 Technical Guide
Mounting interface
ReadyRails
ReadyRails
Supported rack types
Rail type
Square
Static
Static
Rack Installation Instructions
Rack types supported
4-post
2-post
Round
Thread
Flush
on
Center
27