Recommended Tools; Conversion Tasks; Removing The Rack Doors - Dell PowerEdge 4600 Manual

Recommended Tools

The following tools are required to perform the conversion:
• #2 Phillips screwdriver
• 1/4-inch nut driver
• Flat-tipped screwdriver
• Torx T-10 driver (for removing and installing the front panels)

Conversion Tasks

Removing a system from the rack and removing the rack mounting hardware from the rack
cabinet includes the following tasks:
•

Removing the rack doors

• Removing the cable-management arm
• Removing the system from the rack
• Removing the bezel, cover, and front panel
• Installing the trim panel
• Installing the tower front panel
• Installing the metal feet
• Installing the tower front bezel
• Removing the slide assemblies
• Replacing the rack doors
Removing the Rack Doors
For instructions on removing the rack doors, refer to the procedures in the documentation
provided with the rack cabinet.
1-4 Rac k - t o-To we r Co n v ers io n G ui d e