Edelbrock 351-M/400 Installation Instructions

PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with common tools and
procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable performing this installation,
it is recommended to have the installation completed by a qualified mechanic. If you have any questions, please call our Technical Hotline at:
1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday or e-mail us at Edelbrock@Edelbrock.com.
IMPORTANT NOTE: Proper installation is the responsibility of the installer. Improper installation
will void your warranty and may result in poor performance and engine or vehicle damage.
DESCRIPTION: Edelbrock Performer intake manifolds are designed for street-performance Ford 351-M/400 engines operating in the idle-5500 rpm
range. Edelbrock Performer manifolds are designed to replace the stock manifold and to accept stock parts in most cases, as long the OEM or a
recommended carburetor is retained, making an Edelbrock manifold installation among the simplest of bolt-on conversions. This intake manifold is
part of a Total Power Package that can be completed with the use of dyno-matched Performer-Plus camshaft #2172, springs, chain set, carburetors
and related parts specifically designed to give you maximum results. Please refer to the Edelbrock catalog to select all the components you need.
KIT CONTENTS:
❑ 1 Edelbrock #2732 square-bore gasket and steel plate
❑ 1 24" length of 3/8" vacuum hose
❑ 1 Vacuum tee
• ACCESSORIES & INSTALLATION ITEMS: Major recommendations are listed below. See our catalog for details. To order a catalog, call (800)
FUN-TEAM, or visit www.edelbrock.com.
• EGR SYSTEMS: Intake manifold will not accept stock EGR (Exhaust Gas Recirculation) equipment. EGR systems are used on most 1972 and later
model vehicles. Check local laws for requirements.
• CARBURETOR RECOMMENDATIONS:
CARBURETOR
Performer #1405 (600 cfm)
Performer #1406 (600 cfm)
Performer #1805 (650 cfm)
Performer #1806 (650 cfm)
Thunder Series #1805 (650 cfm)
Thunder Series #1806 (650 cfm)
NOTES: Carburetor size (CFM) should be selected based on your specific engine combination. Consult your engine builder or contact our Technical
Hotline at: 1-800-416-8628 for assistance. Carburetors require a #8008 or #8024 stud, washer and nut kit; determine proper length based on
gasket thickness and your accessory mounting requirements (See catalog for details). If a manual choke Performer Series Carburetor is used and
electric choke is desired later on, Performer Series carburetors can be converted to electric choke using Electric Choke Kit #1478. Manual choke
Thunder Series carburetors CAN NOT be converted to manual choke.
• GASKETS: Do not use competition-style intake gaskets for this street manifold. Due to material deterioration over time, internal leakage of
vacuum, oil, and coolant may occur.
INTAKE MANIFOLD
2171
NOTE: To ensure maximum performance and a proper seal, Edelbrock gaskets which are
specifically designed and manufactured for use with Edelbrock parts must be used.
Catalog #2171
Rev. 8/06 - RS/mc
®
CHOKE TYPE
Manual
Electric
Manual
Electric
Manual
Electric
REFERENCE
(None)
PERFORMER FORD 400 INTAKE MANIFOLD
For 351-M/400 Ford Cleveland Engines
PARTS REQUIRED FOR INSTALLATION
#1493 or 1847 throttle plate kit, #1483 or 1844 throttle lever adapter
#1493 or 1847 throttle plate kit, #1483 or 1844 throttle lever adapter
#1493 or 1847 throttle plate kit, #1483 or 1844 throttle lever adapter
#1493 or 1847 throttle plate kit, #1483 or 1844 throttle lever adapter
#1493 or 1847 throttle plate kit, #1483 or 1844 throttle lever adapter
#1493 or 1847 throttle plate kit, #1483 or 1844 throttle lever adapter
RECOMMENDED GASKET
Edelbrock #7265 Port: 1.52" x 2.16", .060" Thickness
Page 1 of 2
Catalog #2171

INSTALLATION INSTRUCTIONS

©2006 Edelbrock Corporation
Brochure #63-0156