Fujitsu PA03360-B525 Operator's Manual page 249

2. Clean the following locations with a cloth moistened with Cleaner F1.
Pad ASSY
It may take long before the cleaner vaporizes if a large quantity is used. When
ATTENTION
cleaning the scanner parts, dampen a cloth with modest quantities of the
cleaner. In addition, wipe off the cleaner completely with a soft lint-free cloth to
leave no residue on the surface of the cleaned parts.
Turn off the scanner before cleaning the following locations.
• Pad ASSY (1 piece)
Wipe the Pad ASSY downwards. When cleaning the Pad ASSY, take care to prevent the
cloth from catching on the metal parts.
• ADF glass surfaces (2 pieces; located on the ADF and opposite side)
Clean lightly.
• Pick roller (1 piece)
Clean lightly taking care not to scratch the surface of the roller. Take particular care in
cleaning the Pick roller since black debris on the roller adversely affects the pickup
performance.
• Plastic rollers (4 pieces on the ADF)
Clean them lightly while rotating the rollers with your finger. Be careful not to roughen the
surface of the rollers. Take particular care in cleaning the plastic rollers since black debris
on the rollers adversely affects the pickup performance.
8.3 Cleaning the Inside of the Scanner
Plastic roller
Glass (2 places)
Eject roller
ScanSnap S510 Operator's Guide
Pick roller
Feed roller
231
8