Fujitsu PA03360-B525 Operator's Manual page 83

■ Right-Click Menu
This menu appears when the ScanSnap Manager icon
In this menu, you can perform the following:
Item
Duplex scan
Simplex scan
SCAN Button Settings
Use Quick Menu
Profile Management
Show scanning results
Check consumable
supplies
Help
Exit
S
Both the front and back sides of the document are scanned at the
same time. Scanning is performed according to the settings
configured in the "ScanSnap Manager - Scan and Save Settings"
dialog box.
Only one side of the document is scanned at one time. Scanning
is performed according to the SCAN Button Settings.
The "ScanSnap Manger - Scan and Save Settings" dialog box
appears.
Settings configured in this dialog are used when scanning is
performed with a [SCAN] button
⇒
Refer to "4.2 Changing Scanning Settings" (page 67).
You can switch between the Quick Menu Mode and Left-Click
Menu Mode by marking/clearing this.
You can select an operational mode that is enabled upon
scanning with a [SCAN] button
⇒
Refer to section "3.1 Flow of Operations" (page 30).
The "Profile Management" dialog box appears.
You can edit profiles.
⇒
Refer to "4.3 Saving Scanning Settings" (page 91).
A message appears after scanning to inform you of the scanning
results, whether blank pages are removed (page 81) and/or the
orientation is changed (page 82).
The "Check consumable status" dialog box appears.
Reset consumable counters to 0 after you replace consumables.
Refer to section "9.1 Replacing Consumables" (page 236).
You can view the Help topics, the version information of
ScanSnap Manager, and the "Preferences" (page 112) and Online
Update (page 249) dialog boxes.
You can exit ScanSnap Manger.
ScanSnap S510 Operator's Guide
4.1 About the ScanSnap Icon
is right-clicked.
S
Function
press.
press.
4
65