Door And Drawer Removal - Maytag MFI2266AEW Use & Care Manual

Installation
Door and Drawer Removal
Some installations require door/drawer removal to
transport the refrigerator to its final location.
.
Lift right side
refrigerator door from
center hinge pin.
Remove door closure
from center hinge pin
on the right side and
retain for later use.
Ri_lht
sioe
door
closure
Note:
For refrigerators in operation, shut off water I
before disconnecting water line from the door.
I
.
2.
3.
Unplug power cord from power source.
Remove toe grille (see page 4).
Remove top hinge cover
from right side refrigerator
door by removing Phillips
screw. Retain screw and
cover for later use.
4. Unscrew %6"hex head
screws from top hinge to
remove hinge and retain
all screws for later use.
.
Z
.
.
10.
11.
12.
Remove top hinge cover
from left side refrigerator
door by removing Phillips
screw. Retain screw and
cover for later use.
Disconnect wire harness
on top left side of
refrigerator door top
hinge. Release connector
by pressing junction
point with a flat blade
screwdriver or fingernail.
Disconnect waterline.
Hold "tabbed" section of
waterline while rotating
the black locking collar
clockwise and slide back.
Unscrew _6" hex head
screws from top hinge to
remove hinge; retain for
later use.
Lift left side refrigerator
door, along with top hinge,
from center hinge pin.
Remove Phillips screws to
remove right and left hinges;
retain all screws for later
use.
Remove both stabilizing
brackets with 3/8"hex
head driver; retain
screws for later use.