Door And Drawer Removal - Maytag MBF2262HE Use And Care Manual

Installation

Door and Drawer Removal

Some installations require door/drawer removal to
transport the refrigerator to its final location.
WARNING
To avoid electrical shock which can cause
severe personal injury or death, observe the
following:
• Disconnect power to refrigerator before removing
doors or drawer. Connect power only after
replacing doors or drawer.
CAUTION
To avoid damage to walls and flooring, protect vinyl
or other flooring with cardboard, rugs or other
protective material.
Materials Needed:
• Phillips screwdriver
• " hex head driver
5
⁄
16
• " hex head driver
3
⁄
8
1. Unplug power cord from power source.
2. Remove toe grille and bottom bracket cover(s)
(see page 3).
3. Remove top hinge cover from
refrigerator door by removing Phillips
screw and retain screw and cover for
later use.
4. Unscrew " hex head screws from top
5
⁄
16
hinge to remove hinge and retain all
screws for later use.
5. Lift refrigerator door from center
hinge pin.
6. For swing freezer door models only: Hold
freezer door while removing hinge pin
with a " hex head driver. Remove door
5
⁄
16
from bottom hinge and retain hinge pin
for later use.
For pullout freezer drawer models
only: Remove plastic sleeve, if
present. Remove center hinge
pin with a 5 " hex head driver.
⁄
16
Retain hinge pin and plastic
sleeve for later use.
7. Remove Phillips screws to
remove center hinge and
retain all screws for later
use.
8. Remove bottom hinge or
stabilizing bracket with
hex head driver and retain
screws for later use. Lift out bottom
hinge pin (on freezer door models).
9. If your model has a pullout freezer
drawer, see page 5 for drawer removal
instructions.
"
3
⁄
8
4