Table of Contents
Advertisement
Network setting of the projector
When making a connection between a computer and a projector with settings other than the default settings, perform the
procedure below to display the menu required when changing the initial settings.
Displaying the NETWORK menu
Press the [MENU] button on the projector.
1
The main menu appears.
PICTURE
POSITION
LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
SECURITY
NETWORK
RETURN
SELECT
ENTER
FUNCTION
Select [NETWORK] with the [▲▼] buttons.
2
The network menu appears.
PICTURE
POSITION
LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
SECURITY
NETWORK
RETURN
SELECT
ENTER
FUNCTION
Press the [ENTER] button
3
You can select the sub-menu item.
Depending on the signals which are input to the projector, it may not be possible to adjust some of the items and use some of
the functions. In the case of an item that cannot be adjusted or a function that cannot be used, the corresponding on-screen item
will not be displayed, and you will not be able to execute it even when you press the [ENTER] button.
PICTURE MODE
DYNAMIC
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
COLOR TEMPERATURE
DEFAULT
DAYLIGHT VIEW
AUTO
OFF
NOISE REDUCTION
AUTO
TV-SYSTEM
WIRED LAN
NAME CHANGE
NETWORK CONTROL
ON
STATUS
INITIALIZE
5
Advertisement
Table of Contents
