Table of Contents
Advertisement
Network setting of the projector
STATUS
Your current settings appear.
Select [STATUS] in the NETWORK menu and press the [ENTER] button.
PICTURE
WIRED LAN
POSITION
NAME CHANGE
NETWORK CONTROL
LANGUAGE
STATUS
DISPLAY OPTION
INITIALIZE
PROJECTOR SETUP
SECURITY
NETWORK
RETURN
SELECT
ENTER
FUNCTION
The status of the following will appear.
NETWORK
DHCP
IP ADDRESS
SUBNETMASK
DEFAULT GATEWAY
MAC ADDRESS
MAC ADDRESS : "Glossary" (See page 18)
INITIALIZE
You can reset the network settings to the factory default settings of the projector.
1
Select [INITIALIZE] in the NETWORK menu and press the [ENTER] button.
PICTURE
POSITION
LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
SECURITY
NETWORK
RETURN
SELECT
ENTER
The entry of the password is prompted if [PASSWORD] is turned [ON] in the "
2
Select [OK] with the [◄►] buttons and press the [ENTER]
button.
ON
"ON" - "OFF"
(See page 6)
(See page 6)
(See page 6)
—
WIRED LAN
NAME CHANGE
NETWORK CONTROL
ON
STATUS
INITIALIZE
(cont.)
SECURITY" menu.
8
INITIALIZE
INITIALIZE
OK
CANCEL
RETURN
SELECT
ENTER
Advertisement
Table of Contents
