Network; Wired Lan Settings; Default Network Settings - Panasonic PTST10E - LCD PROJECTOR Network Operation Manual

Network setting of the projector

NETWORK

Wired LAN settings

You can make detailed wired LAN settings.
1
Select [WIRED LAN] in the NETWORK menu and press the [ENTER] button.
WIRED DETAILED SETUP
CANCEL
SELECT
DHCP
ON: If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be
acquired.
OFF: If a DHCP server does not exist in the network to which the projector is connected, additionally set [IP
ADDRESS ], [SUBNETMASK ] and [DEFAULT GATEWAY ].
"Glossary" (See page 18)
Select each item with the [▲▼] buttons and change the settings following the
2
menu's Operating guidance.
3
Select [OK] with the [▲▼] buttons and press the [ENTER] button.

Default network settings

The following settings are set before the projector leaves the factory.
DHCP
IP ADDRESS
SUBNETMASK
DEFAULT GATEWAY
OFF
DHCP
192.168. 10.100
IP ADDRESS
SUBNETMASK 255.255.255.
DEFAULT GATEWAY 192.168. 10. 1
OK CANCEL
OFF
192.168.10.100
255.255.255.0
192.168.10.1
(cont.)
0
6