PLC_ET30L Basic Serial Command Functional Specifications
6.53 INPUT 1 DVI (AV HDCP) Command
Command
"C53" [CR]
Detail
Select DVI (AV HDCP) input of Input 1
Acceptable
Response
Unacceptable
6.54 LENS SHIFT UP Command
Command
"C5D" [CR]
Detail
Move projection area upward.
Acceptable
Response
Unacceptable
6.55 LENS SHIFT DOWN Command
Command
"C5E" [CR]
Detail
Move projection area downward.
Acceptable
Response
Unacceptable
6.56 LENS SHIFT LEFT Command
Command
"C5F" [CR]
Detail
Move projection area leftward.
Acceptable
Response
Unacceptable
6.57 LENS SHIFT RIGHT Command
Command
"C60" [CR]
Detail
Move projection area rightward.
Acceptable
Response
Unacceptable
6.58 AUTO PC ADJ. Command
Command
"C89" [CR]
Execute AUTO PC ADJ. function
This command works the same way as "AUTO PC" button of the remote control.
Detail
Sending this command during Auto PC Adj. process terminates the operation.
This is the same by "AUTO PC" button of the remote control.
Acceptable
Response
Unacceptable
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
18/24