Table of Contents
Advertisement
Operation
Viewing an External Signal Source
Use the remote control to switch between viewing signals from connected equipment,
such as a VCR, DVD, Set-Top Box or the TV source (broadcast or cable).
English - 42
Setting the Signal Source
1
Press the MENU button.
Press the ENTER button to
select "Input".
2
Press the ENTER button to
select "Source List".
Press the ... or † button to
select a signal source, then
press the ENTER button.
• When you connect
equipment to the TV,
you can choose
between the following sets of jacks: "AV1", "AV2",
"S-VIDEO1", "S-VIDEO2", "COMPONENT1",
"COMPONENT2", or "HDMI/DVI" on the TV's rear
panel and "AV3" or "S-VIDEO3" on the TV's side panel.
• HDMI input can be selected only when the external device
is turned on and connected to the TV.
Alternate method
Press the SOURCE button on the
remote control repeatedly to
select an external signal source.
Input
Input
Source List
: TV
Edit Name
Picture
Anynet
Sound
Channel
Setup
Guide
Move
Enter
Source List
TV
Input
AV1
----
Picture
AV2
----
AV3
----
Sound
S-Video1
----
Channel
S-Video2
----
S-Video3
----
Setup
▼ More
Guide
Move
Enter
AV1
√
√
Return
Return
Advertisement
Table of Contents
