Edelbrock 15017 Installation Instructions

Edelbrock corporation replacement turbo outlet elbow to down-pipe gasket installation instructions

Download this manual

PLEASE study these instructions carefully before installing your new Edelbrock Gasket Kit. If you have any questions or problems, do not hesitate

to contact our Technical Hotline at: 1-800-416-8628, from 7am-5pm, Monday-Friday, Pacific Standard Time or via e-mail at:

Edelbrock@Edelbrock.com. Please fill out and mail your warranty card.

DESCRIPTION: Kit contains a replacement outlet elbow to downpipe gasket as is used in Edelbrock Turbo Kits #1500, 1501, 1502, 1503, and

1504, for use when removing and replacing the downpipe for exhaust maintenence, engine maintenence, etc.

Remove the down-pipe in the reverse order of installation as shown in your Edelbrock Turbo Kit instructions.

Make sure all gasket mating surfaces are clean and free of grease or oil, and make sure any old gasket material has been removed before

installing the new gaskets.

Install the new gasket and install the down-pipe as shown in your Edelbrock Turbo Kit instructions.

Edelbrock Corporation • 2700 California St. • Torrance, CA 90503

Tech Line: 1-800-416-8628 • E-Mail: Edelbrock@Edelbrock.com

Catalog # 15017