Multi-Set Template Editor; Creating New Settings; Editing A Multi-Set Template - Kyocera FS-2100DN User Manual

Creating New Settings

1
2
3
4
5
6
7

Editing a Multi-Set Template

1
2
3
KMnet Admin 3.0

4 Multi-Set Template Editor

Use the Multi-Set Template Editor to create or change the template files. The
template files specify settings for particular groups of devices that are managed
by KMnet Admin. The Multi-Set function in KMnet Admin applies the templates
to printing systems on a network.
Template files in XML format are specific to groups of printing system models,
and to groups of settings shared by those models. Template files created in
KMnet Viewer version 5.x can also be used.
Several template files can be displayed at one time. You can select a file and
click Edit to view and change the settings.
You can create a new settings file from a blank template.
Click File > New.
In the Select Target Device Group dialog box, select the target device group
for the template.
Select the settings group for the template.
Click OK. A dialog box for the selected settings appears.
Select from available settings or options for the template.
Click OK, Apply, or Close. The template appears in the left pane as Newly
Created*.
Select Newly Created*, then click File > Save as.
You can edit an existing template with updated settings.
Click File > Open.
Select a template file.
In the Select Target Device Group dialog box, specify the target device group
for the template. Click OK. The file name, settings group, and device group are
shown on the right side. These values cannot be edited.
4-1