Disable Face-Up Reverse Page Order; Ignore Application Collation; Combine Source And Media Type Lists - Kyocera FS-2020D User Manual

2
3

Disable Face-Up Reverse Page Order

Ignore Application Collation

Selecting Printer Driver Collation
1
2

Combine Source and Media Type Lists

Creating a Combined Source List
1
2
KX DRIVER
From the Media source enumeration list, select the paper supply method. The
current value is listed in the Enumerated value box.
Type an Enumerated value for the media source, and click Apply. To align
settings with a different driver, this value should align with those in the other
driver.
You can restore all the options in Compatibility Settings to the default by
clicking Reset.
With Disable face-up reverse page order selected, the face-up job produces
the first page on top and the last page on the bottom.
With the check box selected, face-up reverse page order is disabled.
With the check box cleared, the default reverse page order is enabled.
This option bypasses the Collate setting in software applications, and gives
priority to the printer driver setting.
With the check box selected, the printer driver Collate setting is used.
With the check box cleared, the application Collate setting is used.
You can ignore the collation setting in the application and use the printer driver
collation setting.
In the Device Settings tab, select Compatibility.
Select Ignore application collation.
You can restore all the options in Compatibility Settings to the default by
clicking Reset.
You can change the driver's Basic tab so that Media type and Source are
combined into one list, labeled Source. In the combined list, Media types are
listed first, followed by cassettes and MP tray.
You can combine the Source and Media type lists in the Basic tab, to make
one Source list.
In the Device Settings tab, select Compatibility.
Select Combine source and media type lists.
You can restore all the options in Compatibility Settings to the default by
clicking Reset.
Device Settings
2-14