Setting Device Options; Setting Up Custom Boxes; Auto Configure - Kyocera FS-2020D User Manual

Setting Device Options

1
2

Setting up Custom Boxes

1
2
3
4
5

Auto Configure

KX DRIVER
You can set the printer driver to match the optional devices installed on your
printing system.
In the Printer Properties dialog box, click the Device Settings tab.
In Device Settings > Device options, select the check boxes for all installed
devices.
You can create up to 1000 custom boxes for storing print jobs. Custom boxes
can be assigned to users who can print the jobs later from the printing system's
operation panel.
Note: Custom box is not available for some models.
In the Device Settings tab, select Hard disk. Or if already selected,
double-click Hard disk.
In the Hard Disk Settings dialog box, click Add.
A new Box number and Box name appear in the Defined custom boxes list.
In the Defined custom boxes list, a new Box number and Box name appear.
If desired, change the number and name in the Box number and Box name
boxes. The number must be within a range of 1 to 1000, and the name length
can be up to 32 characters. You can also type a user name up to 20 characters.
Note: Shared box is selected by default, to enable all network users to save
jobs in the box.
To require users of a shared box to type a password before printing, select
Require password, and type a password up to 16 characters.
Click OK in the Hard Disk Settings and Properties dialog boxes.
The new custom box appears in the Custom Box dialog box when printing.
You can remove a custom box by selecting it in the Defined custom boxes
list and clicking Delete.
You can import a custom box list by clicking Import and browsing for a valid
custom box list file (.CSV or .KXU).
You can save the current custom box list (.CSV or .KXU) in your computer or
network by clicking Export. A saved list can be imported into another printer
driver.
Auto Configure detects the devices installed on the printing system if it is
connected over a network. When your computer is connected to the printing
system through a TCP/IP port, the Auto Configure button appears in the
Device Settings tab. Auto Configure updates the Device options list and
preview images to keep the printer driver consistent with the printing system
configuration.
Device Settings
2-2