Konica Minolta magicolor 7450 II Reference Manual page 201

DEFAULT GATEWAY
Purpose
Range
Default
DHCP/BOOTP
Purpose
Options
Default
TELNET
Purpose
Options
Default
Ethernet Menu
Sets the address of the router/gateway if a router/gateway
is used on your network and you allow users outside your
network environment to print on your printer.
0–255 for each xxx triplet
Use the Up and Down keys to increase or decrease each
number; use the Left and Right keys to move between trip-
lets.
000.000.000.000
If there is a DHCP or BOOTP server on the network, speci-
fies whether the IP address and other network information
is automatically assigned by the DHCP or BOOTP server.
ON
OFF
ON
Select whether to enable or disable Telnet transmissions.
When ENABLE is selected, Telnet transmissions are
enabled.
When DISABLE is selected, Telnet transmissions are dis-
abled.
ENABLE
DISABLE
ENABLE
181