Printer Driver Settings
Options Installed
Parameters
Paper Source Unit
Storage
Duplex Unit
Printer Memory
General
Parameters
Nearest Size and Scale
Resolution
Paper Type
2-12
Settings
Select Unit 3 if an optional lower feeder unit
PF-P07 for the printer has been installed.
The default setting is Disabled.
Select None, CF (1GB Over) or HDD for the
storage unit that is installed.
The default setting is None.
Select Enabled if the duplex unit for the
printer has been installed.
The default setting is Disabled.
Select 256 MB, or 768 MB if an optional
memory for the printer has been installed.
The default setting is 256 MB.
Settings
If no paper tray contains paper of the speci-
fied size, the page is automatically enlarged
or reduced and paper of the most appropriate
size is selected.
The default setting is Off.
Displays the image resolution (High Quality)
for printing.
Specifies the paper type as Printer Default,
Plain Paper, Recycled, Glossy, Glossy 2,
Label, Thick 1 (91 - 150g/m
2
210g/m
), Letterhead, Envelope, Post-
card, Single Side Only (60 - 90g/m
Special Paper (60 - 90g/m
The default setting is Printer Default.
Specifying Printer Driver Settings
2
), Thick 2 (151 -
2
), or
2
).