Adjusting The Paper Stopper - HP d640 Installation And User Manual

Adjusting the paper stopper

After you install the 3,000-sheet HCO, adjust the paper stopper to fit
the size of paper you're using.
To adjust the paper stopper:
Step 1 Locate the paper stopper on top of the HCO and position it as
Step 2 Locate the paper size markers on the stopper and slide the
Align this marker with
the desired paper size.
Figure 24 Paper size markers on the paper stopper
Paper size choices are: Legal, Executive, B5, and A4/LTR.
Note If you're printing on A3 or Ledger paper, you don't need the paper
stopper. Lift the paper stopper up and out of the way.
24 Chapter 2: Using the HCO
shown in Figure 23.
paper stopper to the desired paper size.