Specific Hdmi Control Commands; Play Source Sound Using An Hdmi Command; Turn Off The Power With An Hdmi Command; Turn On The Power With An Hdmi Command - Pioneer PDP-5020FD - 1080p KURO Plasma HDTV Operating Instructions Manual

Use Other Equipment With Your Flat Panel TV

5.4 Specific HDMI Control Commands

When using HDMI equipment with your flat panel TV, some options include when to power the panel and ways to
turn other devices or features On and Off. This section provides steps for commonly desirable setting changes.

5.4.1 Play Source Sound Using an HDMI Command

When sound is coming from a Pioneer AV System through the flat panel TV, placing the panel in Standby causes
the sound to stop. To have the sound continue when the flat panel TV turns On, follow the steps below.
Option
1 ) Access the
HDMI Control Setting
2 ) Select
Hold Sound Status
3 ) Select
On
4 ) Select to allow sound from an AV System to play when the panel turns On.
5 ) Press HOME MENU to exit the menu.
Note: To have the sound continue when the flat panel TV turns On, confirm that the Switch to TV Sound option
appears on the HDMI Control menu before turning the panel Off (see page 77).

5.4.2 Turn OFF the Power With an HDMI Command

The "Power Off Control" function is valid for the devices connected to any of the panel's HDMI ports. To power off
a connected device when the flat panel TV is turned Off, follow the steps below.
1 ) Access the Option
2 ) Select HDMI Control Setting
3 ) Select Power Off Control
4 ) Select On to allow the panel to power off the connected equipment.
5 ) Press HOME MENU to exit the menu.

5.4.3 Turn ON the Power With an HDMI Command

The panel ships from the factory with the Power On command activated. If this feature is turned off in error, it can
be reactivated. To power on the flat panel TV automatically when a connected Pioneer recorder or player is turned
On and images are sent to the panel, follow the steps below.
Option
1 ) Access the
2 ) Select HDMI Control Setting
3 ) Select Power-On Ready
4 ) Select On to have another device power-on the panel.
5 ) Press HOME MENU to exit the menu.
Setup
through the .
from the Option menu.
from the submenu.
through the Setup .
from the Option menu.
from the submenu.
Setup
through the .
from the Option menu.
from the submenu.
05
81
En