Pioneer PDP-5020FD - 1080p KURO Plasma HDTV Operating Instructions Manual page 27

Install Your Flat Panel TV
Connect HDMI equipment (INPUT 4 through INPUT 6):
T
W
Rear view
HDMI compliant
cable (HDMI cable
having the HDMI
mark)
HDMI equipment
INPUT 4 through INPUT 6 are HDMI terminals. Use
INPUT 4 or INPUT 5 (HDMI) terminal when you also input
analog audio signals. For details, refer to "5.2 Use HDMI
Inputs."
Connect a DVD player:
T
W
Rear view
AV cable
(commercially available)
Use INPUT 2 terminals when connecting a DVD player
or other audiovisual equipment. If your DVD player has
an HDMI terminal, use this connection instead of
making video connections. For details, refer to the
operation manual that came with the DVD player.
T
W
Audio cable
(commercially
available)
Make this
connection when
inputting analog
audio signals.
T
W
Component
video cable
(commercially
available)
DVD player
Connect HDMI equipment (INPUT 7):
HDMI compliant
cable (HDMI cable
having the HDMI
mark)
HDMI equipment
Also use INPUT 7 (HDMI terminal) on the side of the
panel when connecting HDMI equipment. For details,
refer to "5.2 Use HDMI Inputs."
Connect an AV receiver:
T
W
Rear view
This connection is
not required when
connecting an AV
AV cable
amp equipped with
(commercially
the surround
available)
function to a
subwoofer.
Subwoofer
Use an optical digital cable to connect an AV receiver to
DIGITAL OUT terminal (optical). If your AV receiver does
not have a DIGITAL IN terminal (optical), you may
connect the panel's AUDIO OUT terminal (audio) to the
audio input terminal on the AV receiver. For details, refer
to the operation manual that came with the AV receiver.
Left side view
T
W
Optical digital
cable
(commercially
available)
AV receiver
02
27
En