Control A Recorder; Control A Player - Pioneer PDP-5020FD - 1080p KURO Plasma HDTV Operating Instructions Manual

Use Other Equipment With Your Flat Panel TV
During playback, use the remote control's up/down arrows (/) to cycle through the surround sound options.
Use the left/right arrows (/) to change the input. To resume playback, return to the HDMI Control menu then
select the function again.
AV Systems
1 Cycles the surround mode in sequence
2 Switches the input source in reverse order
3 Switches the surround mode in reverse order
4 Closes the screen to return to HDMI Control
menu
5 Lists the connected equipment
(model number)
6 Switches the input source in sequence
7 Reserved/Void

5.3.2 Control a Recorder

Press ENTER to start playback or press HDMI CONTROL to return to the menu. This process also applies to
Players. Refer to the chart below for available commands.
1 Skips commercials
2 Fast reverse
3 Stops playback
4 Closes the screen to return to HDMI Control
menu
5 Lists the connected equipment
(model number)
6 Fast forward
7 Starts playback
Note: You can also use
control to conduct the same operations as the control menu buttons.

5.3.3 Control a Player

Press ENTER to start playback or press HDMI CONTROL to return to the menu. This process also applies to
Recorders. Refer to the chart below for available commands.
1 Displays the DVD/Blu-ray disc menu on the
player
2 Fast reverse
3 Stops playback
4 Closes the screen to return to HDMI Control
menu
5 Lists the connected equipment
(model number)
6 Fast forward
7 Starts playback
Note: You can also use
control to conduct the same operations as the control menu buttons.
Recorders
 (Play),  (Stop),  (Pause),
Players
  
(Play), (Stop), (Pause),
HDMI Control
****
1
SURROUND+
INPUT- INPUT+
2
SURROUND-
3
Exit
4
HDMI Control
****
1
2
3
Exit
4
 (Fast Forward) and 
HDMI Control
****
1
MENU
2
3
Exit
4
 
(Fast Forward) and
5
6
7
5
6
7
(Fast Reverse) on the remote
5
6
7
(Fast Reverse) on the remote
05
79
En