Changing The Volume And Sound; Setting Mts/Sap Mode; Changing The Language - Pioneer PDP-5016HD Operating Instructions Manual

06 Basic Operations

Changing the volume and sound

To increase the volume, press the VOL + button on the remote
control unit. To decrease the volume, press the VOL – button.
• The VOLUME +/– buttons on the Plasma Display operates
the same as the VOL +/– buttons on the remote control unit.
• To mute the sound output, press the MUTING button. "
appears on the screen. To quit muting, press the MUTING
button again. Pressing the VOL +/– button also quits
muting.
Plasma Display
Side view
(PDP-5016HD)
Bottom view
(PDP-4216HD)
VOLUME –/+ buttons
Volume adjustment
Volume
20
En
U
M E N
+
V O L
VOL –/+
L -
buttons
V O
+
C H
-
C H
CH VOL
MUTING
4
Muting

Setting MTS/SAP mode

When watching conventional TV programs, you may enjoy
stereo sound and/or Secondary Audio Programs (SAP), using
the Multi-channel Television Sound (MTS) function.
• Stereo broadcasts
"
You can enjoy, for example, sports, shows, and concerts in
dynamic stereo sound.
• SAP broadcasts
MAIN sound: The normal program soundtrack (either in mono
or stereo).
SAP sound: Listen to second language, supplementary com-
mentary and other information. (SAP is mono sound.)
• Conventional TV programs in this manual designate TV channels that
are received through the conventional VHF/UHF frequencies or
conventional cable TV channels.
• When stereo sound is difficult to hear, you can manually switch to
the Mono mode to obtain clearer sound.
• Once the Mono mode is selected, the Plasma Display sound remains
mono even if the Plasma Display receives a stereo broadcast. You
must reselect the Stereo mode if you want to hear stereo sound
again.
• Selecting MTS while the input source is in VIDEO, COMPONENT or
HDMI does not change the type of the sound. In this case, the sound
is determined by the video source.
SPLIT
DTV
SIGNAL
Each time you press the MTS button, MTS toggles as shown
below.
Stereo mode
Stereo
• In each of the MTS/SAP modes selected, the display changes
depending on broadcasting signals being received.

Changing the language

If you have selected a digital TV program that provides
multilanguage services, you can switch among the languages
by pressing the MTS button on the remote control unit.
Each time you press the MTS button, the language switches.
• Switchable languages differ depending on the current broadcast.
• If the language selected through language setting is available when
the channel or program is changed, you will hear that language.
SPLIT P IN P SWAP
INPUT SHIFT
SPLIT SPLIT
CH+ CH–
CH
DELETE
MTS LIST
SAP mode Mono mode
SAP SAP Mono MONO