Partial Document Or Photo Scans; Cannot Scan From A Computer - Lexmark CX410 User Manual

Troubleshooting
Action
Step 6
Check the scan settings.
From the Scan screen, make sure the Content Type and Content Source
settings are correct for the document being scanned.
Are the Content Type and Content Source settings correct for the
document being scanned?
Step 7
Increase the scan resolution settings for a higher‑quality output.
Did the increased resolution produce a higher‑quality output?

Partial document or photo scans

Action
Check the placement of the document or photo.
Make sure the document or photo is loaded facedown on the scanner
glass in the upper left corner.
Is the document or photo loaded correctly?

Cannot scan from a computer

Action
Step 1
Make sure the printer is turned on and that Ready appears on the printer
display before scanning a job.
Does Ready appear before scanning the job?
Step 2
Turn off the printer, then wait for about 10 seconds, and then turn the
printer back on.
Is there an error message on the printer display?
Step 3
Check the cable connections between the printer and the print server to
make sure they are secure.
For more information, see the setup documentation that came with
the printer.
Are the cable connections between the printer and the print server
secure?
Yes No
Go to step 7. Change the Content
Type and Content
Source settings to
match the document
being scanned.
Problem solved. Contact
support.
Yes No
Contact customer Load the document or
support. photo facedown on the
scanner glass in the
upper left corner.
Yes No
Go to step 3. Go to step 2.
Clear the error Go to step 3.
message.
Contact customer Tighten the cable
support. connections.
315
customer