Konica Minolta bizhub 361 User Manual page 31

How to Use the Authentication Unit
5.7.4 Performing Scan To Me
The following explains how to perform Scan To Me on the MFP.
!
Detail
If the correct settings are configured to use Scan To Me, [E-Mail] appears
on the Fax/Scan screen to send data to the user's e-mail address.
1
Press the [Fax/Scan] key on the control panel.
2
Press [Direct Input].
3
Press [E-mail].
4
Press [OK].
5
Specify scan conditions in [Scan Settings], [Original Settings], and
[Communication Settings].
6
Load the original and press the [Start] key on the control panel.
This scans the original and sends data to the user's e-mail address.
AU-211P
5
93