Konica Minolta bizhub 361 User Manual page 24

How to Use the Authentication Unit
5.6.4 Performing PKI Card Print
The following explains how to handle PKI Card Print.
Sending print data (Printer driver setting)
Use the following steps to configure the printer driver setting when
encrypting print data using the
1
Click [Print] in the menu of the application software.
2
Select the desired printer ("KONICA MINOLTA C353 Series PS" or
"KONICA MINOLTA C353 Series PCL").
3
Click [Properties] or [Preferences].
4
The Basic tab appears.
5
Click [Authentication/Account Track].
6
Select the "Realm(Domain)" and "IC Card Reader CSP", and click [OK].
– The value of "Realm(Domain)" corresponds to the registration
number of the Active Directory. For example, if the registration
number of an Active Directory is set to "2", the value of "Realm(Do-
main)" is also set to "2".
– PKI Card Print uses authentication information of the
therefore, it disables the authentication information specified in
"User Authentication".
AU-211P
card and sending it to the MFP.
CAC/PIV
5
card;
CAC/PIV
86