Control Panel - Konica Minolta bizhub 361 User Manual

Control panel/touch panel
2 Control panel/touch panel
2.1

Control panel

Use the control panel for fax/scan operation. The following describes the keys and switches provided on the
control panel.
22
21
20
19
18
17
16
15
No. Part name
1 Touch panel
2 Main power indicator
3 [Power] (auxiliary power) key
4 [Mode Memory] key
5 [Utility/Counter] key
6 [Reset] key
7 [Interrupt] key
8 [Stop] key
9 [Proof Copy] key
501/421/361
1
14 13 12 11
Description
Displays various setting screens and messages. Specify the various set-
tings by directly touching the panel.
Lights up in green when the machine is turned on with the main power
switch.
Press to turn on/off machine operations, for example, copying, printing or
scanning. When turned off, the machine enters a state where it conserves
energy.
Press to register (store) a desired copy/scan setting mode or to recall the
registered copy/scan mode.
Press to display the Utility mode and the Meter Count screen.
Press to clear all settings (except registered settings) entered in the control
panel and touch panel.
Press to enter the Interrupt mode. While the machine is in the Interrupt
mode, the indicator on the [Interrupt] key lights up in green and the mes-
sage "Now in Interrupt mode." appears on the touch panel. To cancel the
Interrupt mode, press the [Interrupt] key again.
Pressing the [Stop] key during scanning temporarily stops the scan oper-
ation.
Press to print a single proof copy to be checked before printing a large
number of copies. By pressing the [Proof Copy] key before scanning or
copying, the result can be viewed on the touch panel.
10 9
2
2
3
4
5
6
7
8
2-2