Table of Contents
Advertisement
1.11.2
RJ-45 LAN Connector with Integrated LEDs
Two LEDs are built into the RJ-45 LAN connector (shown in Figure 5 below).
Table 6 describes the LED states when the board is powered up and the LAN
subsystem is operating.
Table 6. LAN Connector LED States
LED
LED Color
Link
Green
Data Rate
Green/Yellow
Item
Description
A
Link LED (Green)
B
Data Rate LED (Green/Yellow)
Figure 5. LAN Connector LED Locations
LED State
Off
On
Blinking
Off
Green
Yellow
Condition
LAN link is not established.
LAN link is established.
LAN activity is occurring.
10 Mbits/s data rate is selected.
100 Mbits/s data rate is selected.
1000 Mbits/s data rate is selected.
Product Description
27
Advertisement
Table of Contents
