Lan Subsystem Software; Rj-45 Lan Connector With Integrated Leds; Lan Connector Led Locations; Lan Connector Led States - Intel DQ87PG Specification

Power Management Features:
Magic Packet* wake-up enable with unique MAC address
•
• ACPI register set and power down functionality supporting D0 and D3 states
Full wake up support (APM, ACPI)
•
• MAC power down at Sx, DMoff with and without WoL
Auto connect battery saver at S0 no link and Sx no link
•
Energy Efficient Ethernet (EEE) support
•
Latency Tolerance Reporting (LTR)
•
Optimized Buffer Flash/Fill (OBFF) support
•
• ARP and ND proxy support through LAN Connected Device proxy
Wake on LAN (WoL) from Deep Sx
•
• Provides lower power usage to meet ENERGY STAR 5.2 and ErP specifications
1.9.2

LAN Subsystem Software

LAN software and drivers are available from Intel's World Wide Web site.
For information about
Obtaining LAN software and drivers
1.9.3

RJ-45 LAN Connector with Integrated LEDs

Two LEDs are built into the RJ-45 LAN connector (shown in Figure 5).
Table 7 describes the LED states when the board is powered up and the LAN
subsystem is operating.
Table 7. LAN Connector LED States
LED LED Color
Link Green
Data Rate Green/Yellow
Item Description
A Link LED (Green)
B Data Rate LED (Green/Yellow)
Figure 5. LAN Connector LED Locations
LED State
Off
On
Blinking
Off
Green
Yellow
Refer to
http://downloadcenter.intel.com
Condition
LAN link is not established.
LAN link is established.
LAN activity is occurring.
10 Mb/s data rate is selected.
100 Mb/s data rate is selected.
1000 Mb/s data rate is selected.
Product Description
29