Overview Of Bios Features; Introduction; What This Chapter Contains 3.1 Introduction - Intel BLKDG35EC Technical Product Specification

Product specification
Table of Contents

Advertisement

3

Overview of BIOS Features

3.1 Introduction ................................................................................... 57
3.2 BIOS Flash Memory Organization ....................................................... 58
3.3 Resource Configuration .................................................................... 58
3.4 System Management BIOS (SMBIOS)................................................. 59
3.5 Legacy USB Support ........................................................................ 60
3.6 BIOS Updates ................................................................................. 61
3.7 BIOS Recovery................................................................................ 62
3.8 Boot Options................................................................................... 63
3.9 Adjusting Boot Speed....................................................................... 64
3.10 BIOS Security Features .................................................................... 65
3.1

Introduction

The board uses an Intel BIOS that is stored in the Serial Peripheral Interface Flash
Memory (SPI Flash) and can be updated using a disk-based program. The SPI Flash
contains the BIOS Setup program, POST, the PCI auto-configuration utility, and Plug
and Play support.
The BIOS displays a message during POST identifying the type of BIOS and a revision
code. The initial production BIOSs are identified as
When the BIOS Setup configuration jumper is set to configure mode and the computer
is powered-up, the BIOS compares the CPU version and the microcode version in the
BIOS and reports if the two match.
The BIOS Setup program can be used to view and change the BIOS settings for the
computer. The BIOS Setup program is accessed by pressing the <F2> key after the
Power-On Self-Test (POST) memory test begins and before the operating system boot
begins. The menu bar is shown below.
Maintenance Main
NOTE
The maintenance menu is displayed only when the board is in configure mode.
Section 2.3 on page 50 shows how to put the board in configure mode.
Advanced
Security
ECG3510M.86A.
Power
Boot
Exit
57

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dg35ec

Table of Contents