Setting The Bios Configuration Jumper; Location Of The Bios Configuration Jumper Block; Jumper Settings For The Bios Setup Program Modes - Intel BLKDG31PR - 1333FSB DDR2 800 Audio Lan 4SATA uATX 10Pack Motherboard Product Manual

Intel Desktop Board DG31PR Product Guide

Setting the BIOS Configuration Jumper

NOTE
Always turn off the power and unplug the power cord from the computer before
moving the jumper. Moving the jumper with the power on may result in unreliable
computer operation.
Figure 25 shows the location of the Desktop Board's BIOS configuration jumper block.
Figure 25. Location of the BIOS Configuration Jumper Block
The three-pin BIOS jumper block enables all board configurations to be done in the
BIOS Setup program. Table 11 shows the jumper settings for the BIOS Setup
program modes.
Table 11. Jumper Settings for the BIOS Setup Program Modes
Jumper Setting
52
Mode
Normal (default) (1-2)
Configure (2-3)
Recovery (None)
Description
The BIOS uses the current configuration and
passwords for booting.
After the Power-On Self-Test (POST) runs, the
BIOS displays the Maintenance Menu. Use this
menu to clear passwords.
The BIOS recovers data in the event of a failed
BIOS update.