Manufacturing Options - Intel BLKD945GTPL Technical Product Specification

1.1.2 Manufacturing Options

Table 2 describes the manufacturing options. Not every manufacturing option is available in all
marketing channels. Please contact your Intel representative to determine which manufacturing
options are available to you.
Table 2.

Manufacturing Options

Audio Subsystem
IEEE-1394a
Interface
LAN subsystem
SATA RAID
SCSI Hard Drive
Activity LED
Connector
Trusted Platform
Module (TPM),
revision 1.2
For information about
Available configurations for the board
®
Intel High Definition Audio subsystem in one of the following configurations:
• 8-channel (7.1) audio subsystem with five analog audio outputs and two S/PDIF
digital audio outputs (coaxial and optical) using the Sigmatel* 9223 audio codec
• 6-channel (5.1) audio subsystem with three analog audio outputs using the
Sigmatel 9220 audio codec
IEEE-1394a controller and three IEEE-1394a connectors (one back panel connector,
two front-panel connectors)
The board provides one of the following:
• Gigabit (10/100/1000 Mbits/sec) LAN subsystem using the
®
Intel 82573E/82573V/82574V Gigabit Ethernet Controller
• 10/100 Mbits/sec LAN subsystem using the Intel
LAN Connect (PLC) device
®
Intel 82801GR I/O Controller Hub (ICH7-R) for RAID support (levels 0,1, 0+1, and 5)
on the SATA interface
Allows add-in hard drive controllers (SCSI or other) to use the same LED as the
onboard IDE controller.
A component that enhances platform security
Product Description
®
82562GX/82562GZ Platform
Refer to
Section 1.2, page 15
11