Table of Contents
Advertisement
–
Automatic answering timer configures the time delay before
the device automatically accepts the incoming call.
–
Outgoing call conditions configures the connected Bluetooth
device to make outbound calls within one of two settings: Even
when device locked or Only when device unlocked.
• My call sound: allows you to personalize the sounds you hear
during a call with and without earphones.
–
Tap My call sound settings and select Personalize call
sound.
–
Follow the detailed on-screen instructions.
• Use extra vol. for calls: activating this feature places an extra
volume button on your currently active call screen.
• Increase volume in pocket: increases the ringtone volume
when the device is in a pocket or a bag. Uses the proximity
sensor to detect its location.
• Call forwarding: configures call forwarding options.
Important! If the Wi-Fi Calling feature is active, Call forwarding
is greyed-out and inaccessible.
310
• Additional settings: allows you to configure additional call
settings. For more information, refer to "Configuring
Additional Voice Call Settings" on page 314.
• Voicemail service: allows you to assign the service.
• Voicemail settings: displays the settings for the voicemail.
• Ringtone: assigns your device's ringtone.
• Vibrate: configures the vibrate settings. Choose from Always,
Only in silent mode, or Never.
• TTY mode: allows you to configure the TTY settings. For more
information, refer to "TTY Mode" on page 314.
Call rejection
1. From the Home screen, tap
2. Press
and then tap Call settings
3. Activate the feature by moving the Auto reject mode
slider to the right.
4. Tap Auto reject mode and tap one of the following
options:
• All numbers: to reject all calls.
• Auto reject numbers: to reject all calls in your Reject list.
5. Tap Auto reject list.
(Phone).
Call rejections.
Advertisement
Table of Contents
