Video Scopes; Displaying A Video Scope; Configuring The Waveform Monitor - Canon EOS C500 Instruction Manual

Video Scopes

Video Scopes
The camera can display a simplified waveform monitor or vectorscope. It can also display an edge monitor* to
help you focus. The video scopes appear only on the LCD screen. They do not appear in the viewfinder or on an
100
external monitor. In order to use the video scopes, the monitor unit must be attached to the camera.
* The edge monitor looks at the focus of the entire picture and displays the results as a waveform. The edge monitor is available
only in mode.
Operating modes:

Displaying a Video Scope

Press the WFM button (waveform monitor or vectorscope) or EDGE
MON. button (edge monitor).
• The waveform monitor will appear in a window on the lower right of the
screen.
• You can repeatedly press the WFM button to activate the video scopes
in the following sequence.
Waveform monitor
• Alternatively, you can display the video scopes using [w Other
Functions] > [WFM (LCD)] > [Setting]. Select [WFM] for the waveform
monitor, [VS] for the vectorscope or [Edge Mon.] for the edge monitor.

Configuring the Waveform Monitor

The camera's waveform monitor function offers 5 modes. You can also
change the gain.
1 Open the [Waveform Monitor] submenu.
[w Other Functions] > [WFM (LCD)] > [Waveform Monitor]
2 Select the desired option and then press SET.
• If you do not need to change the gain, you do not need to perform
steps 3 and 4.
3 Open the waveform monitor [Gain] submenu.
[w Other Functions] > [WFM (LCD)] > [Gain] (under [Waveform Monitor])
4 Select [1x] or [2x] and then press SET.
Options
[Line]: Sets the waveform monitor to line display mode.
[Line+Spot]: The waveform of the area in the red frame is displayed in red on top of the [Line] mode waveform.
[Field]: Sets the waveform monitor to field display mode.
[RGB]: Functions like an RGB parade scope.
[YPbPr]: Functions like a YPbPr parade scope.
Vectorscope Off
[w Other Functions]
[WFM (LCD)]
[Waveform Monitor]
[Line]