Storage - Echo SHC-1700 - Type 1, SHC-1700 - Type 1E, SHC-2100 - Type 1, SHC-2100 - Type 1E, SHC-2400 - Type 1, SHC-2400 - Type 1E, HCA-2400 - Operator's Manual

Echo shaft hedge clipper operator's manual
Hide thumbs Also See for SHC-1700 - Type 1, SHC-1700 - Type 1E, SHC-2100 - Type 1, SHC-2100 - Type 1E, SHC-2400 - Type 1, SHC-2400 - Type 1E, HCA-2400 -:
Table of Contents

Advertisement

30
9.
Install drum. The loop in the spring must engage the slot in the
drum. Replace the screw and washer.
10. Hold the rope in the notch (H) and rotate the drum counterclock-
wise several turns.
11. Hold the drum to prevent it from rewinding, pull the excess rope
taught with the handle and allow to rewind slowly.
12. Pull rope several times to check spring tension. If rope does not
rewind fully, repeat step 10.
13. Pull rope out all the way. Drum must be able to turn an additional 1/
2 turn counter clockwise. If drum does not turn, see your Autho-
rized ECHO Service Dealer.
14. Install starter and rear handle and test.
S
TORAGE
Long Term Storage (over 30 days)
Do not store your unit for a prolonged period of time (30 days or longer)
without performing protective storage maintenance which includes the
following:
1.
Store unit in a dry, dust free place, out of the reach of children.
WARNING
Do not store in enclosure where fuel fumes may accumulate or
reach an open flame or spark or serious personal injury may result.
2.
Place the ignition in the "OFF" position.
DANGER
H

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hca-2400 type 1e

Table of Contents