Echo SHC-1700 - Type 1, SHC-1700 - Type 1E, SHC-2100 - Type 1, SHC-2100 - Type 1E, SHC-2400 - Type 1, SHC-2400 - Type 1E, HCA-2400 - Operator's Manual page 29

4. Remove the old starter rope and prepare the new rope by first
heating both ends to prevent fraying.
5. Pass one end of the rope through the opening of the drum and tie a
knot. Press knot and end of rope in cavity of drum.
6. Thread the rope through the eyelet in the housing (C) then through
the starter handle (D). Follow the illustration and tie another knot in
the free end of the rope. Pull the knot into the handle.
7. Check that the hook (E) on the end of the spring touches the post
(F). Lightly grease the top of the spring and the post.
8. Hold the drum pawl (G) side up and wind the rope on the drum
counterclockwise, four (4) turns.
H C
EDGE
O ' M
PERATOR S
D
C
F
G
LIPPER
29
ANUAL
E