LG DLEX3885W Owner's Manual page 41

T OU LESHOOTING
BEFORE CALLING FOR SERVICE {cont.)
Steam doesn't
generate but no error
code is shown.
• Water level error.
2 bars are displayed
in the LCD screen.
Unplug dryer and call for service.
Garments still • Too many or too different • Small loads of 1 to 5 items work best.
wrinkled after types of garments in dryer.
STEAMFRESH,M. • Load fewer garments. Load similar-type garments.
There are no creases • The function of this cycle • Use an iron to make creases.
left on garment after is to remove wrinkles from
STEAM FR ESH'M. fabric.
Garments have • This is normal. • Depends on individual moisture level in skin.
static after REDUCE
STATIC.
Garments are too • Correct drying options not • Select load weight manually before starting
damp or too dry after selected. REDUCE STATIC option.
REDUCE STATIC.
Garments are not • This is normal. = Depends on the amount or type of garments.
uniformly damp after
EASY IRON.
Water drips from door • This is normal. • This is steam condensation on door surface.
during Steam Cycle.
Steam is not visible • This is normal. • Steam vapor is difficult to see when the door is
during Steam Cycle. closed.
Drum does not turn • This is normal. • The drum is turned off so that the steam vapor
during Steam Cycle. remains in the drum.
Cannot see steam • This is normal. • Steam is released at different stages of the cycle
vapor at the for each option.
beginning of cycle.
The display shows • MORE TIME button pressed. • Pressing the MORE TIME button several times will
BULKY LOAD. set the cycle for a large load such as a comforter.
Odors remain in • STEAMFRESH
TM
did not • Fabrics containing strong odors should be
clothing after remove odor completely, washed in a normal cycle.
STEAMFRESH
TM.
CHECK FILTER light • Lint filter is almost clogged • Pause the drying cycle and clean the lint filter.
is on during the or full.
drying cycle
• • install a shorter or straighter duct run. See the
installation instructions.
4 bars are displayed
in the LCD screen.
Ductwork is slightly too
long or has too many
turns/restrictions.
Partial blockage of the
ductwork due to lint buildup.
Ductwork is too long or has
too many turns/restrictions.
Significant blockage of the
ductwork due to lint buildup
or debris.
Ductwork should be checked/cleaned soon.
Dryer can be used in this condition, but drying times
may be longer.
If "END OF CYCLE" is displayed after the end of
cycle, it will be off in 4 minutes. If POWER button
is pressed or the door is opened, power will be off
immediately.
Install a shorter or straighter duct run. See the
Installation instructions.
Ductwork should be checked/cleaned soon.
Dryer can be used in this condition, but drying times
may be longer.
If "NEED FLOW CHECK" is displayed after the end
of cycle, it will be off in 2 hours. If POWER button
is pressed or the door is opened, power will be off
immediately.
J
41
MFL62512806 EN 0208.indd 41 2010.2.8 2:7:54 PM