Cycle Setting Buttons - LG DLEX3885W Owner's Manual

CYCLE SETTING BUTTONS
SENSOR DRY cycles have preset settings
that are selected automatically. MANUAL DRY
cycles have default settings, but you may also
customize the settings using the cycle setting
buttons. Press the button for that option to
view and select other settings.
NOTE: To protect your garments, not every
dryness level, temperature, or option is
available with every cycle. See the Cycle
Guide for details.
DRY LEVEL
Selects the level of dryness for
the cycle. Press the DRY LEVEL
button repeatedly to scroll
through available settings.
• This option is only available with SENSOR
DRY cycles.
The dryer will automatically adjust the cycle
time. Selecting VERY DRY or MORE DRY
will increase the cycle time, while LESS
DRY or DAMP DRY will decrease the cycle
time.
Use a LESS DRY or DAMP DRY setting for
items that you wish to iron.
TEMP. CONTROL
Adjusts the temperature setting
from ULTRA LOW to HIGH.
This allows precise care of your
fabrics
and garments. Press the TEMR
CONTROL button repeatedly to scroll through
available settings.
TIME DRY
Allows you to manually select
the drying time, from 20 to
60 minutes, in 10-minute
increments. Use this for small
loads or to remove wrinkles. Use the MORE
TIME/LESS TIME buttons to add or reduce
the drying time in 1-minute increments.
BEEPER
Adjusts the volume of the end-
of-cycle beeper, or turns off the
beeper.
HO TO USE
Your dryer features several additional cycle
options to customize cycles to meet your
individual needs. Certain option buttons also
feature a special function (see the following page
for details) that can be activated by pressing and
holding that option button for 3 seconds.
TO Add Cycle Options to a Cycle:
O Turn on the dryer and turn the cycle selector
knob to select the desired cycle.
O Use cycle settings to adjust
the buttons the
settings for that cycle.
_1 Press the cycle option button(s) for the
option you would like to add. A confirmation
message will be shown in the display.
_ Press the START/PAUSE button the
to start
cycle. The dryer will start automatically.
WRINKLE CARE
Selecting this option will tumble the
load periodically for up to 3 hours
after the selected cycle, or until
the door is opened. This is helpful
in preventing wrinkles when you are unable to
immediately remove items from the dryer.
DAMP DRY BEEP
With this option, the dryer will beep
when the load is approximately 80%
dry. This allows you to remove faster-
drying lightweight items or items that
you would like to iron or hang while still slightly
damp.
RACK DRY
Use RACK DRY with items, such as
wool sweaters, silk, and lingerie, that
should dry flat. RACK DRY can also
be used with items that should not
be tumbled dry, such as gym shoes or stuffed
animals. Press RACK DRY button to activate or
deactivate the RACK DRY function.
NOTE: NEVER use the rack with a tumble
dry cycle.
55
MFL62512806 EN 0208.indd 33 2010.2.8 2:7:45 PM