LG DLEX3885W Owner's Manual page 36

HOWTO USE
STEAM FUNCTIONS (cont.)
LG's new steam technology allows you to inject
fabrics with a swirling jet of hot steam to refresh
clothes, reduce static, and make ironing easier.
Simply select the STEAMFRESH
TM
cycle, or you
can add a Steam option to selected cycles.
Using the STEAMFRESH
TM
Cycle
STEAMFRESH
TM
uses the power of steam alone
to quickly reduce wrinkles and odor in fabrics. It
brings new life to wrinkled clothes that have been
stored for an extended time and makes heavily
wrinkled clothes easier to iron. STEAMFRESH
TM
can also be used to help reduce odors in fabrics.
NOTES:
• REDUCE STATIC or EASY IRON options can
also be used during the STEAMFRESH
TM
cycle.
Depending on the load (quantity of items), you
may change the amount of time for the cycle by
pressing the MORE TIME or LESS TIME button.
The display will show 3, 5, or BULKY LOAD. 3
means 3 or fewer items, 5 is for 4 or 5 items,
and BULKY LOAD indicates a large load such
as a comforter.
TO USe the STEAMFRESH
TM
Cycle:
O Turn on the dryer and turn the cycle selector
knob to select the STEAMFRESH
TM
cycle.
e To an option function,
add select REDUCE
STATIC, EASY IRON, or WRINKLE CARE.
O Depending on the load (quantity of items),
steam time can be changed by pressing the
MORE TIME or LESS TIME buttons.
O Press START/PAUSE button to start the cycle.
Using the Steam Options:
This option injects steam late in the
drying cycle to reduce the static
electricity caused by dry fabrics
rubbing together. Change the amount
of time for the cycle by pressing the MORE TIME
or LESS TIME button, depending on the load
(quantity of items). The display will show the
recommended number of items, such as 7, 9, 11,
14, 16, or 18.
The EASY IRON option provides
uniform, properly dampened fabrics for
ironing, which can save time and make
ironing easier. Change the amount of
time for the cycle by pressing the MORE TIME
or LESS TIME button, depending on the load
(quantity of items). The display will show the
recommended number of items, such as 1, 2, 3,
4, or5.
The REDUCE STATIC and EASY IRON options
can only be used with the STEAM FRESH
TM,
HEAVY DUTY, PERM.PRESS, Co-FrON/NORMAL,
DELICATES, TOWES, SPEED DRY, FRESHEN UP
and TIME DRY cycles.
NOTES:
When SENSOR DRY is selected with the
REDUCE STATIC option, a DRY LEVEL of LESS
or DAMP cannot be selected.
The REDUCE STATIC or EASY IRON option
may also be selected during TIME DRY cycles.
After the Steam option is selected in TIME DRY,
the MORE TIME or LESS TIME buttons will
change the steam time ONLY.
After pressing START/PAUSE, the MORE TIME
or LESS TIME buttons will be disabled.
TO Add STEAM tO a Standard Cycle:
Turn on the dryer and turn the cycle selector
knob to select the desired cycle.
O
Use the cycle setting buttons to adjust the
settings for that cycle.
Press the Steam option button for the Steam
option you would like to add. Then adjust for
the load size using the MORE TIME or LESS
TIME buttons.
Press START/PAUSE button to start the cycle.
Using the STEAMSANITARY TMcycle
New STEAMSANITARY TMcycle is ideal for
sanitizing non washable items quickly and easily
using the power of steam alone. Recommend to
use this cycle for cotton and polyester material.
(Do NOT use for urethane foam, Down feathers or
delicates items)
56
MFL62512806 EN 0208.indd 36 2010.2.8 2:7:51 PM