Test Mode; Quick Test Mode - Samsung WF365BTBGWR/A1 Technical Information

ALIGNMENT AND ADJUSTMENTS
To avoid risk of electrical shock, personal injury or death; disconnect power to washer
before servicing, unless testing requires power.

TEST MODE

Power Off State
Special Test Mode
Power On State
(Normal User Mode)

Quick Test Mode

Definition of Quick Test Mode:
- Check operation of all LED's (Verify faulty LED).
- Check model and software version.
- Check different operating modes (e.g. water valve, motor, door, drain pump, etc.).
How to Enter:
- Plug in the unit.
- Press Soil Key, Spin Key and Power Key at the same Time.
[BIGBANG]Technical_information-03207A_EN_20120531.indd 4
WARNING
Test Mode:
Quick Test Mode
Each Test Mode for the BIGBANG is as follows in
EEPROM Clear
Mode
the coming pages. The test modes indicated by
Continuous Cycle
Mode
the red arrows are modes unable to get an access
Service Mode
once the washing cycle has started due to safety
Quick Spin Test Mode
Cycle Count Check Mode resons.
S/W Version Check Mode
Fast Time Down Test Mode
Demo Mode
Board Input Test Mode
Diagnostic Code
CheckMode
4
2012-05-31 2:47:04