Troubleshooting; Test Mode - Samsung WA45T3400A Series Service Manual

4. TROUBLESHOOTING

4-1. TEST MODE

No mode
1 Smart Install
2 Automatic check mode
3 Manual check mode
4 S/W version Check
5 Diagnostic Code Check
Automatic Mode of Smart Install
• A utomatically start all operation modes of Smart Install.
Manual Mode of Smart Install
• Under the condition of manual mode, every time when "Delay End" is pressed, next step will be entered.
• Contents like washings, etc. are not allowed in the drum.
Operation
mode
1 carry out test for machine door locking
2 carry out test for drainage pump operation
3 carry out test for operation of preparatory valve
Co carry out test for operation of cold water valve
Ho carry out test for operation of hot water valve
carry out test for operation of water shot valve
6 carry out test for operation of washing heater
carry out test for operation of rinsing
* Accessories not included in the product are not required to check and they can be skipped directly.
Identity of Smart Install completion
• After Smart Install is completed normally, 「OK(Ot)」 a identity will display.
• If Smart Install is completed abnormally or Smart Install fails to work, 「nG」 identity will display.
Result Enquiry of Automatic Mode of Smart Install
• Under the condition of appearance of ' A S' identity, press "Delay End + Start/Pause" button.
• I f automatic mode result is in normal condition, 「OK(Ot)」 identity will display. If automatic checking mode
fails to complete normally or fails to execute, 「nG」 identity will appear.
Diagnosis Information Display Mode
• U nder the condition of appearance of 「AS」 identity, if the first button on the right at the bottom is pressed, 「CR」 identity
will appear and diagnosis information display mode is entered.
• U nder the condition of appearance of 「CR」 identity , if turn the jog dial control switch clockwise,
diagnosis codes generated before will display 7 digits at most.
18 _ Troubleshooting
Standby
Smart Install
Enter Smart Install
Enter Smart Install
Enter Smart Install
Description
How to enter
Set the scheduled Press Start/Pause
time to 17:00
Press Start/Pause While displaying "AS"
Press Delay End While displaying "AS" delay end, Check devices in
turn when pressing delay end.
Press the first button on the bottom While displaying "AS"
Press the first button on the right at the bottom While displaying
"AS", "Cr". Tum jog dial along the direction of CW when displaying.
Operation
mode
7 carry out test for operation of drainage pump
8 carry out test for operation of dehydration
9 carry out test for operation of drying heater and drying fan
10 carry out test for operation of machine door
OK(Ot) Automatic mode of Smart Install is completed normally
Smart Install
for 7 seconds
Description